Buenas...!!!

Quiero actualizar la bios de un colega, que tiene una platinix 2... Me he bajado el zip de la bios y en el readme pon esto...

P6I845 PlatiniX-2 BIOS V2.3SLCP release note.


This disk contains three files2_23.BIN,README.TXT and AWDFLASH.EXE

1.The checksum of P2_V23.BIN is CE82(Hex);

2. How to use AWDFLASH.EXE utility:
This is a flash memory write/read utility.
IMPORTANT NOTE:
The AWDFLASH utility could not correctly run in windows (virtual 8086)
MS-DOS mode. It must be proceeded with the following steps:
1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
from the dos prompt under DOS6.XX or WINDOWS9X environment.
2.Boot system with diskette.
3.Then run the AWDFLASH utility.
Usage:
AWDFLASH [BIOSfile1] [BIOSfile2] [/<sw>[/<sw>...]]
BIOSfile1: New BIOS Name For FLASH Programming
BIOSfile2: BIOS File For Backing-up the Original BIOS

<command> function definition:
cc: clear CMOS; cp: clear PnP;
cd: clear DMI.
/sn: No Original BIOS Backup. If this option is chosen:
Be sure your new BIOS is compatible with your MB. If not, the system
are damaged.
/sy: Backup Original BIOS to Disk File.
Examples:
AWDFLASH ****.BIN /py/sn/cd/cp

Warning:
Avoid power-off incidently in upgrading procedure, or system would fail
to reboot!

UPDATE DATE:6/25/2003

La cosa es que no puedo crear un diskette booteable (el simulador de ms-dos del windows 2000 no me deja...

qué puedo haceR?

salu2