+ Responder tema
Página 1 de 4 1 2 3 ... ÚltimoÚltimo
Resultados 1 al 10 de 38
  1. #1
    Usuario registrado
    Fecha de ingreso
    05 may, 10
    Ubicación
    Germany Cologne
    Mensajes
    21

    [AF] Andreoid & Finnzwerg retoques watercool (muchas fot

    Hi everybody!
    I would like to show you some pictures what I (André) with a friend (Finn) do tinker in our free time.
    We both come from Germany like Bundymania.

    Our crafting threads on hobby basis consist in many forums since 2007.
    The self made waterblocks have exited many readers, and some of you allready know our homemade coolers. Maybe some of you allready had discovered our pictures in the waterblock-picture-threads in other forums.
    In close cooperation with many forum users, we have developed a lot of waterblocks.
    Often, you can take part of the developement and be really close with decisions here in the forum.

    I hope that you are going to enjoy reading my posts and you do some questions or answering mine, when i have some questions in design or something like this! ^^


    Here is a picture of what we are able to do and so you can see what you can expect here in this thread


    at the beginning a picture from our old workshop in my basement:

    Left side: a noise-protection-box with CNCs, on the right...our manual drill.
    at the bottom: this is me...gluing the CNC coolant effluent

    the workshop was really small.
    It was 9m² and is now too small for our new CNC
    But see below for more


    left side, our first CNC - right, a couple of EVGA 680i PWM copper bottoms


    here a CAD of our new CNC milling machine ...
    here in the thread you can follow the assembling
    from the CAD to the implementation of the real machine

    the old basement was much, much too small for our new CNC machine...so we watched out for a new room.
    An acquaintance have had a little space for ous in his wooden hall.
    The place was just twice as large as my cellar, but hopefully that will be enough space for our new workshop.


    in the next few posts I will provide you with pictures of building the new workshop,.. so stay tuned


    MfG Andreoid & finnzwerg

    (please anwser in english.. spanish i only can translate with google -.- )

  2. #2
    Usuario registrado CV Avatar de Rafa91
    Fecha de ingreso
    21 feb, 09
    Ubicación
    Sevilla
    Mensajes
    4,803
    The first picture is awsome! The finish of the blocks is quite impresive for "homemade" blocks. I have read you in Xtreme Systems before and it's a plesure to have you in our forums.

    BTW, please edit the pictures because they exceed the maximum allowed size (650*650) or just leave them like links or thumbnails.

    Regards and hoping for more photos! :wink:

  3. #3
    Usuario registrado
    Fecha de ingreso
    05 may, 10
    Ubicación
    Germany Cologne
    Mensajes
    21
    Cita Iniciado por Rafa91
    The first picture is awsome! The finish of the blocks is quite impresive for "homemade" blocks. I have read you in Xtreme Systems before and it's a plesure to have you in our forums.

    BTW, please edit the pictures because they exceed the maximum allowed size (650*650) or just leave them like links or thumbnails.

    Regards and hoping for more photos! :wink:
    thank you very much

    wtf 650x650? and i though 600x800 is smal
    hmm can't make them more smal... cause it would have an affect on other forums also -.-
    and if i just link these pix everybody is nerved cause he have to open every single link

  4. #4
    Usuario registrado CV
    Fecha de ingreso
    12 feb, 08
    Ubicación
    La Coruña, Galicia
    Mensajes
    1,762
    Hello Andreoid

    As Rafa said, truly impresive work on those blocks.

    I might contact you in a while for a custom work on a Maximus III Extreme

    The max width for the pictures is 650 pixels so, please, re-upload them using an image host like this. Select the URL file type.

    Greetings
    Guia de RL 08-06-10 // Mi worklog // Servicio de modding y montaje

    E8500 4.3 GHz // Rampage Extreme 1202 // 4GB STT Hyper MGH-E 1800 C7 // GTX 260 216sp // Enermax Galaxy DXX 1 KW // Samsung 400 GB // X-Fi Titanium // Enfundado MurderMod // Lian Li V2110b

    Ybris ACS // Bitspower Fullcover // EK FC280 Ni/AC // D5 EK V2 // EK 250 // BI GTX 360 // Delta EFB1212SHE // Lamptron FC-3 // Primoflex LRT 1/2" 3/4" // Espigas BP // Agua destilada

  5. #5
    Usuario registrado CV Avatar de Rafa91
    Fecha de ingreso
    21 feb, 09
    Ubicación
    Sevilla
    Mensajes
    4,803
    Cita Iniciado por Andreoid
    wtf 650x650? and i though 600x800 is smal
    Yes, I also think that it's small, but are the rules and we have to respect them. If you don't do it a mod will do it xD

  6. #6
    Usuario registrado
    Fecha de ingreso
    05 may, 10
    Ubicación
    Germany Cologne
    Mensajes
    21
    Cita Iniciado por Rafa91
    Cita Iniciado por Andreoid
    wtf 650x650? and i though 600x800 is smal
    Yes, I also think that it's small, but are the rules and we have to respect them. If you don't do it a mod will do it xD
    haha... i think these are smal enough now

    so,..no new cnc ,..without a place for it ^^
    the room for the new workshop at the beginning looked like this:


    Storage -.- good that vacuum cleaner exists ^^


    The wall you can see here is the wall to the outside.
    We have embedded a couple of thick fiberglass mats so it's not going to be so cold in winter.


    it is finally a more lighted workshop ... This is much better than a cellar


    then we started with the casing:


    here the first wall is finished:


    That was't this easy with the 2 oblique beams


    and here the second wall


    -------------------------------------------------------------
    -------------------------------------------------------------
    -------------------------------------------------------------


    so, that I not only bother you with dirty pictures of building the workshop
    here something brilliant:

    Finn and I had bought two 16GB USB Flash Drives supertallent
    these were ideal to refine ^^


    very slowly and carefully engraved with the CNC


    like it?






    regards Andreoid

  7. #7
    Usuario registrado CV Avatar de Rafa91
    Fecha de ingreso
    21 feb, 09
    Ubicación
    Sevilla
    Mensajes
    4,803
    Cita Iniciado por Andreoid
    I'm drooling xD

  8. #8
    Usuario registrado
    Fecha de ingreso
    05 may, 10
    Ubicación
    Germany Cologne
    Mensajes
    21
    Cita Iniciado por Rafa91
    I'm drooling xD
    ^^

    building the workshop goes on

    Finn was afraid that he will get cold feet in winter
    so he had insulated the floor additionally


    well protected during working with the circular saw


    and the saw does its work


    Today, another cameraman
    (I was sitting at home with a fresh operated hernia at this time -.-)


    The new floor has been moved up into the last corner:


    ready:

    whether it works... i dont know
    cause we have never worked without the wooden floor

    -------------------------------------------

    here 2 full surround views:

    http://anfi-tec.de/forenbilder/ausbau2/gr9.JPG

    for a large view, click on the link under the pictures.


    http://anfi-tec.de/forenbilder/ausbau2/gr10.JPG

    -------------------------------------------

    Then they went on with the inside working
    First made a couple of drawers
    which lend themselves well as a surface to do the cuts


    and the first factory-bank (with sitting-height) was finished
    It was getting dark outside ... and the 2 workers were exhausted


    -------------------------------------------------------------
    -------------------------------------------------------------
    -------------------------------------------------------------

    and now something for everyone who doesnt look in here for building workshop pictures:

    my sister bought her aan dell-laptop... she said that it is too impersonal
    so I've levered out the logo and made 2 plaques to engrave preturned

    first try...


    here the cnc made some mistakes with the "n"


    not difficult to guess what's her name ^^


    i hope that i can show you something diffentent than engraving works next time

    regards Andreoid

  9. #9
    Usuario registrado
    Fecha de ingreso
    05 may, 10
    Ubicación
    Germany Cologne
    Mensajes
    21
    actually this should be a watercooling thread so I have to show you some waterblocks a few times between ^^

    top left of the MSI 790FX fullcover ... and the follower down in the middle


    because a bad sitting capacitor on the board the new MSI 890FX fullcover block have now a smaller top. is has a winding distance of 18mm


    Despite 890s engraving backward compatible to 790FX


    ----------------------------------------------------------------

    and if we are talking about the 890 boards...
    PWM032 the new 890FX for ASUS boards!


    ----------------------------------------------------------------

    here a few photos of the user "fhantastic" from the "forumdeluxx"
    He has let nickeled his evga cooler set (not by us...we can't do this)


    klick

    PWM029 EVGA P55 left block

    klick

    the EVGA P55 FTW 200 fullcover Waterblock
    but it dont fit on the EVGA P55 FTW without "200" addition

    klick


    klick

    regards
    André

  10. #10
    Usuario registrado
    Fecha de ingreso
    05 may, 10
    Ubicación
    Germany Cologne
    Mensajes
    21
    something new again ;D

    I start with a couple of photos that are prettier than mine
    a high quality project, which I supported a little bit:


    Marc's "Projekt Black meets Blue" - Marc1993
    http://www.hardwareluxx.de/community/f1 ... 84330.html

    on the Gigabyte GA-P55A were installed a PWM031 two times and a UCD grande.
    the bottoms were stained dark chemical













    hmmm ,..,... In my presentation, the last five images are not shown

+ Responder tema
Página 1 de 4 1 2 3 ... ÚltimoÚltimo

Permisos de publicación