Inicio > Foros
- Foros
- Hardware
- Placas Base, Microprocesadores y Memorias
- Duda mhz memorias Mushkin DDR3
Resultados 1 al 2 de 2
Tema: Duda mhz memorias Mushkin DDR3
-
08/02/2009, 14:12hard-hachedoso
- Fecha de ingreso
- 31 ene, 09
- Mensajes
- 6
Duda mhz memorias Mushkin DDR3
Hola, tengo la siguiente duda, a ver si alguien me puede ayudar porque la verdad no tengo mucha idea del tema:
Tengo 2 memorias (Mushkin Essential DDR3 PC3-10600 2GB 2x1GB CL9 segun pc-componentes) mushkin ddr3 de 1gb cada modulo que en teoria son a 1333 mhz, pero segun el cpu-z y el everest van a 667mhz, alguien me puede explicar esto? puede ser por tenerlas a menos voltaje del que deberia?
Propiedades del módulo de memoria:
Nombre del módulo Muskin 991636 (996636)
Número de serie Ninguno
Tamaño del módulo 1 GB (2 ranks, 8 banks)
Tipo de módulo Unbuffered DIMM
Tipo de memoria DDR3 SDRAM
Velocidad de memoria DDR3-1333 (667 MHz)
Ancho del módulo 64 bit
Método de detección de errores Ninguno
Es lo que está en rojo lo que me raya, porque pone 1333, pero luego va a 667?
Dejo el registro del cpu-z a ver si me podeis dar una solución, gracias
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q9550
Codename Yorkfield
Specification Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
Package Socket 775 LGA (platform ID = 4h)
CPUID 6.7.A
Extended CPUID 6.17
Core Stepping E0
Technology 45 nm
Core Speed 2000.1 MHz (6.0 x 333.4 MHz)
Rated Bus speed 1333.4 MHz
Stock frequency 2833 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 6144 KBytes, 24-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 8.5x
max VID 1.250 V
Features XD, VT
Chipset
------------------------------------------------------------------------------
Northbridge NVIDIA nForce 790i SLI SPP rev. B1
Southbridge NVIDIA nForce 790i SLI MCP rev. A3
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 2048 MBytes
Channels Dual
Memory Frequency 666.7 MHz (1:2)
CAS# 9.0
RAS# to CAS# 9
RAS# Precharge 9
Cycle Time (tRAS) 24
Bank Cycle Time (tRC) 33
Command Rate 1T
Memory SPD
------------------------------------------------------------------------------
DIMM #1
General
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Mushkin (7F7F7F9400000000)
Size 1024 MBytes
Max bandwidth PC3-10700H (667 MHz)
Part number 991636 (996636)
Attributes
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 444 593 667
CAS# 6.0 8.0 9.0
RAS# to CAS# delay 6 9 10
RAS# Precharge 6 9 10
TRAS 16 22 25
TRC 22 30 34
DIMM #2
General
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Mushkin (7F7F7F9400000000)
Size 1024 MBytes
Max bandwidth PC3-10700H (667 MHz)
Part number 991636 (996636)
Attributes
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 444 593 667
CAS# 6.0 8.0 9.0
RAS# to CAS# delay 6 9 10
RAS# Precharge 6 9 10
TRAS 16 22 25
TRC 22 30 34
-
08/02/2009, 14:13SergiojoseC4
- Fecha de ingreso
- 14 jun, 07
- Ubicación
- San Lorenzo de El Escorial
- Mensajes
- 3,142
Es que al velocidad que te da el CPU-ID tienes que multiplicarla por 2
Saludos
Powered by vBulletin® Version 4.2.5
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.
Traducción por vBulletin Castellano Copyright © 2025.
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.
Traducción por vBulletin Castellano Copyright © 2025.
AutoLinker v1.3 by Poker Forum