Ahora que ha empezado el fresquete, me ha dado por hacer OC para no pasar frío :lol:

Actualmente lo tengo así, y por primera vez he conseguido hacer las 20 pasadas del LinX. El problema es que las temps suben a 85 grados en 1 o 2 cores y los otros 2 a 75 o así.



Código:
> Advanced Frequency Settings			[Press Enter]
	
		CPU Clock Ratio					[20 X]
		CPU Frequency				 4.00GHz (200x20)
	  > Advanced CPU Core Features		[Press Enter]
			Intel(R) Turbo Boost Tech.	[Disabled]
			CPU Cores Enabled			[All]
			CPU Multi-Threading			[Enabled]
			CPU Enhanced Halt (C1E)		[Disabled]
			C3/C6/C7 State Support		[Disabled]
			CPU Thermal Monitor			[Disabled]
			CPU EIST Function			[Auto]
			Bi-Directional PROCHOT		[Auto]
		QPI Clock Ratio					[x36]
		QPI Link Speed					 7.2GHz
		Uncore Clock Ratio				[x16]
		Uncore Frequency				 3200MHz
		>>>>>  Standard Clock Control
		Base Clock(BCLK) Control		[Enabled]
		BCLK Frequency(Mhz)				[200]
		Extreme Memory Profile(X.M.P.)	[Disabled]
		System Memory Multiplier (SPD)	[ 8.0]
		Memory Frequency(Mhz)	1066	 1600
		PCI Express Frequency(Mhz)		[100]
		>>>>>  Advanced Clock Control
		CPU Clock Drive					[700mV]
		PCI Express Clock Drive			[700mV]
		CPU Clock Skew					[  0ps]
		IOH Clock Skew					[  0ps]

> Advanced Memory Settings

		Extreme Memory Profile(X.M.P.)	[Disabled]
		System Memory Multiplier (SPD)	[ 8.0]
		Memory Frequency(Mhz)	1066	 1600
		Performance Enhance				[Standard]
		DRAM Timing Selectable   (SPD)	[Auto]
		Profile DDR Voltage				 1.5V
		Profile QPI Voltage				 1.175V
	  x Channel Interleaving		6	 Auto
	  x Rank Interleaving			4	 Auto
		>>>>> Channel A
	  > Channel A Timing Settings		[Press Enter]
	  > Channel A Turnaround Settings	[Press Enter]
		>>>>> Channel B
	  > Channel B Timing Settings		[Press Enter]
	  > Channel B Turnaround Settings	[Press Enter]
		>>>>> Channel C
	  > Channel C Timing Settings		[Press Enter]
	  > Channel C Turnaround Settings	[Press Enter]

> Advanced Memory Settings

		Voltage Types			Normal		Current
		-------------------------------------------
		>>>CPU
		Load-Line Calibration				[Level 2]
		CPU Vcore				1.22500V	[1.30000]
	  x Dynamic Vcore(DVID)	   +0.00000V	 Auto
		QPI/Vtt Voltage			1.175V		[1.315V]
		CPU PLL					1.800V		[1.800V]
		>>> MCH/ICH
		PCIE					1.500V		[Auto]
		QPI PLL					1.100V		[Auto]
		IOH Core				1.100V		[Auto]
		ICH I/O					1.500V		[Auto]
		ICH Core				1.100V		[Auto]
		>>>DRAM
		DRAM Voltage			1.500		[1.640V]
		DRAM Termination		0.750		[Auto]
		Ch-A Data VRef.			0.750		[Auto]
		Ch-B Data VRef.			0.750		[Auto]
		Ch-C Data VRef.			0.750		[Auto]
		Ch-A Adrdress VRef.		0.750		[Auto]
		Ch-B Adrdress VRef.		0.750		[Auto]
		Ch-C Adrdress VRef.		0.750		[Auto]

> Miscellaneous Sttings					[Press Enter]

		Isochronous Support				[Enabled]
		Virtualization Technology		[Enabled]
Así que me gustaría saber si:
- Tengo algún voltaje muy alto o debería cambiar algo
- Si al desactivar el HT notaré mucho el bajón o no de rendimiento, porque según he leído me bajarían unos 10º las temps.
- Qué opciones de ahorro de energía debería activar para que siga estable esto?
- Debería poner las latencias en manual?

Saludos y gracias.

Mi equipo:
Código:
Intel Core i7 920
Gigabyte GA-x58-UD7
Mushkin Redline 6GB 1600MHz
Noctua NH-D14
ATi HD5870
Corsair HX850
Coolermaster HAF 932