Tema: OC Q9550 desde cero

Hola gente
Quien me hecha una mano dar vida a mi Q9550?
Me gustaria llegar a los 3600M
Esta es mi Bios
Mi me morias son a 1333

Rampage Extreme 1202 Bios Template

Extreme Tweaker

Ai Overclock Tuner [Manual,Auto,X.M.P,CPU Level Up,Memory Level Up]
OC From Memory Level Up [Auto,PC3-11600,PC-12800]
FSB Frequency []
CPU Ratio Setting []

> CPU configuration
CPU Ratio Setting []
C1E Support [Disabled,Enabled]
CpU TM Function [Disabled,Enabled]
Max CPUID Value Limit [Disabled,Enabled]
Vanderpool Technology [Disabled,Enabled]
Execute Disable Bit [Disabled,Enabled]
Core MultiPprocessing [Disabled,Enabled]

* CPU clock skew []
* NB clock skew []
FSB Strap to North Bridge [Auto,200,266,333,400]
PCIE Frequency [100]
DRAM Frequency []
DRAM Command Rate [Auto,1N,2N]
DRAM Timing Control [Auto,Manual]

1st information
CAS# Latency []
RAS# to CAS# Delay []
RAS# PRE Time []
RAS# ACT Time []
RAS# to RAS# Delay [Auto]
REF Cycle Time [Auto]
WRITE Recovery Time [Auto]
READ to PRE Time [Auto]

2nd information
READ to WRITE Delay(S/D) [Auto]
WRITE to READ Delay(S) [Auto]
WRITE to READ Delay(D) [Auto]
READ to READ Delay(S) [Auto]
READ to READ Delay(D) [Auto]
WRITE to WRITE Delay(S) [Auto]
WRITE to WRITE Delay(D) [Auto]

3rd information
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
PRE to PRE Delay [Auto]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]

DRAM Static Read Control [Auto,enabled,disabled]
DRAM Dynamic Write Control [Auto,enabled,disabled]

> DRAM Skew Control :
DRAM CMD Skew on Channel A [Auto]
DRAM CLK Skew on DIMM A1 [Auto]
DRAM CLK Skew on DIMM A2 [Auto]
DRAM CTL Skew on DIMM A1 [Auto]
DRAM CLT Skew on DIMM A2 [Auto]

DRAM CMD Skew on Channel B [Auto]
DRAM CLK Skew on DIMM B1 [Auto]
DRAM CLK Skew on DIMM B2 [Auto]
DRAM CTL Skew on DIMM B1 [Auto]
DRAM CTL Skew on DIMM B2 [Auto]

Ai Clock Twister [Auto,Lighter,Light,Moderate,Strong,Stronger]
Ai Transaction Booster [Auto,Manual]

(-- Manual --)

Common Performance Level []

Pull in of CHA PH1 [Disabled]
Pull in of CHA PH2 [Disabled]
Pull in of CHB PH1 [Disabled]
Pull in of CHB PH2 [Disabled]

(-- Manual --)

EPU II Phase Control [Auto,Full Phase]

*** Please key in numbers or select voltage!***
CPU Voltage []
Load-Line Calibration [Auto,Disabled,Enabled]
CPU PLL Voltage []
FSB Termination Voltage []
CPU GTLVref(0) [Auto]
CPU GTLVref(1) [Auto]
CPU GTLVref(2) [Auto]
CPU GTLVref(3) [Auto]
NB GTLVref [Auto]
North Bridge Voltage []
DRAM Voltage []
NB DDRVref [Auto]
DDR3 Channel A Vref [Auto]
DDR3 Channel B Vref [Auto]
South Bridge 1.5 Voltage []
South Bridge 1.05 Voltage []

******************************************
CPU Spread Spectrum [Auto,Disabled]
PCIE Spread Spectrum [Auto,Disabled]
Quien me ayuda

Vete al foro guiri de xtremesystems, en la seccion Intel creo que habra alguna rama de esa placa con resultados:

http://www.xtremesystems.org/forums/for ... y.php?f=59