[AF] Andreoid & Finnzwerg retoques watercool (muchas fot

Hi everybody!
I would like to show you some pictures what I (André) with a friend (Finn) do tinker in our free time.
We both come from Germany like Bundymania.

Our crafting threads on hobby basis consist in many forums since 2007.
The self made waterblocks have exited many readers, and some of you allready know our homemade coolers. Maybe some of you allready had discovered our pictures in the waterblock-picture-threads in other forums.
In close cooperation with many forum users, we have developed a lot of waterblocks.
Often, you can take part of the developement and be really close with decisions here in the forum.

I hope that you are going to enjoy reading my posts and you do some questions or answering mine, when i have some questions in design or something like this! ^^

Here is a picture of what we are able to do and so you can see what you can expect here in this thread ;)
http://anfi-tec.de/forenbilder/09.11.09/9.jpg

at the beginning a picture from our old workshop in my basement:
http://anfi-tec.de/forenbilder/09.11.09/1.JPG
Left side: a noise-protection-box with CNCs, on the right...our manual drill.
at the bottom: this is me...gluing the CNC coolant effluent
http://anfi-tec.de/forenbilder/09.11.09/2.JPG
the workshop was really small.
It was 9m² and is now too small for our new CNC
But see below for more

http://anfi-tec.de/forenbilder/09.11.09/8.jpg
left side, our first CNC - right, a couple of EVGA 680i PWM copper bottoms

http://anfi-tec.de/forenbilder/09.11.09/5.5.png
here a CAD of our new CNC milling machine ...
here in the thread you can follow the assembling ;)
from the CAD to the implementation of the real machine

the old basement was much, much too small for our new CNC machine...so we watched out for a new room.
An acquaintance have had a little space for ous in his wooden hall.
The place was just twice as large as my cellar, but hopefully that will be enough space for our new workshop.
http://anfi-tec.de/forenbilder/09.11.09/3.JPG

in the next few posts I will provide you with pictures of building the new workshop,.. so stay tuned ;)


MfG Andreoid & finnzwerg
(please anwser in english.. spanish i only can translate with google -.- )

The first picture is awsome! The finish of the blocks is quite impresive for "homemade" blocks. I have read you in Xtreme Systems before and it's a plesure to have you in our forums.

BTW, please edit the pictures because they exceed the maximum allowed size (650*650) or just leave them like links or thumbnails.

Regards and hoping for more photos! :wink:

Cita:

---

Iniciado por Rafa91

The first picture is awsome! The finish of the blocks is quite impresive for "homemade" blocks. I have read you in Xtreme Systems before and it's a plesure to have you in our forums.

BTW, please edit the pictures because they exceed the maximum allowed size (650*650) or just leave them like links or thumbnails.

Regards and hoping for more photos! :wink:

---

thank you very much :)

wtf 650x650? and i though 600x800 is smal :D
hmm can't make them more smal... cause it would have an affect on other forums also -.-
and if i just link these pix everybody is nerved cause he have to open every single link :(

Hello Andreoid

As Rafa said, truly impresive work on those blocks.

I might contact you in a while for a custom work on a Maximus III Extreme :)

The max width for the pictures is 650 pixels so, please, re-upload them using an image host like this. Select the URL file type.

Greetings

Cita:

---

Iniciado por Andreoid

wtf 650x650? and i though 600x800 is smal :D

---

Yes, I also think that it's small, but are the rules and we have to respect them. If you don't do it a mod will do it xD

Cita:

---

Iniciado por Rafa91

Cita:

---

Iniciado por Andreoid

wtf 650x650? and i though 600x800 is smal :D

---

Yes, I also think that it's small, but are the rules and we have to respect them. If you don't do it a mod will do it xD

---

haha... i think these are smal enough now :D

so,..no new cnc ,..without a place for it ^^
the room for the new workshop at the beginning looked like this:
http://anfi-tec.de/forenbilder/ausbau1/1.JPG

Storage -.- good that vacuum cleaner exists ^^
http://anfi-tec.de/forenbilder/ausbau1/2.JPG

The wall you can see here is the wall to the outside.
We have embedded a couple of thick fiberglass mats so it's not going to be so cold in winter.
http://anfi-tec.de/forenbilder/ausbau1/3.JPG

it is finally a more lighted workshop ... This is much better than a cellar:)
http://anfi-tec.de/forenbilder/ausbau1/5.JPG

then we started with the casing:
http://anfi-tec.de/forenbilder/ausbau1/6.JPG

here the first wall is finished:
http://anfi-tec.de/forenbilder/ausbau1/7.JPG

That was't this easy with the 2 oblique beams
http://anfi-tec.de/forenbilder/ausbau1/8.JPG

and here the second wall
http://anfi-tec.de/forenbilder/ausbau1/10.JPG

-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------


so, that I not only bother you with dirty pictures of building the workshop
here something brilliant:

Finn and I had bought two 16GB USB Flash Drives supertallent
these were ideal to refine ^^
http://anfi-tec.de/forenbilder/09.11.02/usbstick/1.jpg

very slowly and carefully engraved with the CNC
http://anfi-tec.de/forenbilder/09.11.02/usbstick/2.jpg

like it?
http://anfi-tec.de/forenbilder/09.11.02/usbstick/3.jpg


http://anfi-tec.de/forenbilder/09.11.02/usbstick/4.jpg


regards Andreoid

Cita:

---

Iniciado por Andreoid

http://anfi-tec.de/forenbilder/09.11.02/usbstick/3.jpg

---

I'm drooling xD

Cita:

---

Iniciado por Rafa91

I'm drooling xD

---

^^

building the workshop goes on

Finn was afraid that he will get cold feet in winter :D
so he had insulated the floor additionally
http://anfi-tec.de/forenbilder/ausbau2/1.JPG

well protected during working with the circular saw
http://anfi-tec.de/forenbilder/ausbau2/2.JPG

and the saw does its work
http://anfi-tec.de/forenbilder/ausbau2/3.JPG

Today, another cameraman
(I was sitting at home with a fresh operated hernia at this time -.-)
http://anfi-tec.de/forenbilder/ausbau2/4.JPG

The new floor has been moved up into the last corner:
http://anfi-tec.de/forenbilder/ausbau2/6.JPG

ready:
http://anfi-tec.de/forenbilder/ausbau2/8.JPG
whether it works... i dont know
cause we have never worked without the wooden floor :D

-------------------------------------------

here 2 full surround views:
http://anfi-tec.de/forenbilder/ausbau2/9.JPG
http://anfi-tec.de/forenbilder/ausbau2/gr9.JPG

for a large view, click on the link under the pictures.

http://anfi-tec.de/forenbilder/ausbau2/10.JPG
http://anfi-tec.de/forenbilder/ausbau2/gr10.JPG

-------------------------------------------

Then they went on with the inside working
First made a couple of drawers
which lend themselves well as a surface to do the cuts :)
http://anfi-tec.de/forenbilder/ausbau2/12.JPG

and the first factory-bank (with sitting-height) was finished
It was getting dark outside ... and the 2 workers were exhausted


-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------

and now something for everyone who doesnt look in here for building workshop pictures:

my sister bought her aan dell-laptop... she said that it is too impersonal
so I've levered out the logo and made 2 plaques to engrave preturned

first try...
http://anfi-tec.de/forenbilder/ausbau2/DSC06363.JPG

here the cnc made some mistakes with the "n"
http://anfi-tec.de/forenbilder/ausbau2/DSC06364.JPG

not difficult to guess what's her name ^^
http://anfi-tec.de/forenbilder/ausbau2/DSC06367.JPG

i hope that i can show you something diffentent than engraving works next time :(

regards Andreoid

actually this should be a watercooling thread :D so I have to show you some waterblocks a few times between ^^

top left of the MSI 790FX fullcover ... and the follower down in the middle
http://anfi-tec.de/forenbilder/10.05.17/1.JPG

because a bad sitting capacitor on the board the new MSI 890FX fullcover block have now a smaller top. is has a winding distance of 18mm
http://anfi-tec.de/forenbilder/10.05.17/3.JPG

Despite 890s engraving backward compatible to 790FX ;)
http://anfi-tec.de/forenbilder/10.05.17/2.JPG

----------------------------------------------------------------

and if we are talking about the 890 boards...
PWM032 the new 890FX for ASUS boards!
http://anfi-tec.de/forenbilder/10.05.17/4.JPG

----------------------------------------------------------------

here a few photos of the user "fhantastic" from the "forumdeluxx"
He has let nickeled his evga cooler set (not by us...we can't do this)

http://anfi-tec.de/forenbilder/10.05.17/5.JPG
klick

PWM029 EVGA P55 left block
http://anfi-tec.de/forenbilder/10.05.17/7.JPG
klick

the EVGA P55 FTW 200 fullcover Waterblock
but it dont fit on the EVGA P55 FTW without "200" addition
http://anfi-tec.de/forenbilder/10.05.17/8.JPG
klick

http://anfi-tec.de/forenbilder/10.05.17/9.JPG
klick

regards
André

something new again ;D

I start with a couple of photos that are prettier than mine :D
a high quality project, which I supported a little bit:

http://anfi-tec.de/forenbilder/marc/...kuehler(6).jpg
Marc's "Projekt Black meets Blue" - Marc1993
http://www.hardwareluxx.de/community/f1 ... 84330.html

on the Gigabyte GA-P55A were installed a PWM031 two times and a UCD grande.
the bottoms were stained dark chemical

http://anfi-tec.de/forenbilder/marc/...serkuehler.jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(1).jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(2).jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(3).jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(4).jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(5).jpg

hmmm ,..,... In my presentation, the last five images are not shown

Unfortunately I can not make such amazing photos
for now I'll show some new models ^^
a new fullcover light waterblock for the MSI 890GXM-G65

the cool links, like the 790 or 890FX cooler, the NB with the voltage transformers
I have decided against engraving, because the arm is very thin
http://anfi-tec.de/forenbilder/marc/MSI_890GXM-G65.jpg

http://anfi-tec.de/forenbilder/marc/...GXM-G65(1).jpg

the Sapphire IPC AM3DD785G NB & SB block i have made new too :)
(our Soleil01 cpu block as AMD Version)
http://anfi-tec.de/forenbilder/marc/..._AM3DD785G.jpg
close to the air cooler
http://anfi-tec.de/forenbilder/marc/2.jpg


when a slot milling soleil01 bottom,..some things can go wrong ...
here is the saw blade bursted
you can still see the remains of copper sheet in the bottom
as a time to say, there is no action at a water cooling :D
http://anfi-tec.de/forenbilder/marc/1.JPG


this weekend will get an Asus Crosshair IV Formula (AMD 890FX)
http://anfi-tec.de/forenbilder/marc/3.jpg
There will probably come a full light as the 790FX
and maybe a total fullcoverblock


.

Let's get for something of the tinkering which may be missing in no instance

the music ^^

I had 2 large PA speakers left, but the tweeter were broken
http://anfi-tec.de/forenbilder/09.11.26/1.JPG

opened and located
http://anfi-tec.de/forenbilder/09.11.26/2.JPG

the small hair-wires were torn down at the focal points -.-
http://anfi-tec.de/forenbilder/09.11.26/3.JPG

very thin
http://anfi-tec.de/forenbilder/09.11.26/4.JPG

So out of that glue
http://anfi-tec.de/forenbilder/09.11.26/5.JPG

soldered a new thicker wire
http://anfi-tec.de/forenbilder/09.11.26/6.JPG

Top out again, and solder them
http://anfi-tec.de/forenbilder/09.11.26/7.JPG

tested works :) - assembling
http://anfi-tec.de/forenbilder/09.11.26/8.JPG

and in the new workshop
http://anfi-tec.de/forenbilder/09.11.26/9.JPG

-------------------------------------------------------

In the workshop it went on.
all the drawers were finished and the workintables were completed
http://anfi-tec.de/forenbilder/09.11.26/10.JPG

stuff-boxes
http://anfi-tec.de/forenbilder/09.11.26/11.JPG

computer for controling for cncs
http://anfi-tec.de/forenbilder/09.11.26/13.JPG

------------------------------------------------------

last but not least something for the watercooling-junkys:
I once i have tested whether Soleil fullcopperblock can be produced economically:
I have 3 pieces of milled
View from below:
http://anfi-tec.de/forenbilder/09.11...ildeckel/1.jpg

done (cut / thread / etc) from the bottom with Oring
http://anfi-tec.de/forenbilder/09.11...ildeckel/2.jpg

upside
http://anfi-tec.de/forenbilder/09.11...ildeckel/3.jpg

complete with bracket screws floor and then he looked like this:
http://anfi-tec.de/forenbilder/09.11...ildeckel/4.jpg

http://anfi-tec.de/forenbilder/09.11...ildeckel/5.jpg

http://anfi-tec.de/forenbilder/09.11...ildeckel/6.jpg

http://anfi-tec.de/forenbilder/09.11...ildeckel/7.jpg

http://anfi-tec.de/forenbilder/09.11...ildeckel/8.jpg

We will keep the top here and investigate whether any material change has an effect on the performance of the cooler

in large quantities (economic production) as the Soleil POM-top can not produce the fullcopperblock with our current resources
for everyone who does not know it yet:

Soleil01 with black pom-top
http://anfi-tec.de/forenbilder/09.11...ildeckel/9.jpg

the problems in producing the fullcopperblock are:
the bevel on mice top
The countersunk screws
The threading ger G1 / 4 "thread (I do this by hand, because the cordless electric screwdriver is to weak)
greater tolerance transgressions because the production is simply too difficult to edit material as plastic
maybe we could produce fullcopperblock economically with the big cnc later, but then it would kill the time by changing the cutting-tools manually

so an automatic tool change spindle for the big cnc must be purchased...
(but free in the required size, it will cost about € 10,000 incl
accessories such as tool holders, ac drives, pneumatic actuation)
*hmmpf* ... so saving money saving money saving money :'(
regards [ΛF] Andreoid

Hi Andrea.

Some time ago I follow your work both waterblocks as CNC (I'd seen in CNC Zone).

The truth is that I can only give you my congratulations.

Give me so jealous! The availability of a space dedicated to workshop!

I have my router installed in a room in a flat.

I send you a mp to make some inquiries.

A greeting.

Cita:

---

Iniciado por pritt

Hi Andrea.

---

please without the second "a" Andrea is a girls name ^^
my name is André ^^

Cita:

---

Iniciado por pritt

Some time ago I follow your work both waterblocks as CNC (I'd seen in CNC Zone).

---

you have seen my cnc on cnczone.com? o0 or did i misunderstood your sentence?

Cita:

---

Iniciado por pritt

The truth is that I can only give you my congratulations.

---

thx :)

Cita:

---

Iniciado por pritt

I have my router installed in a room in a flat.

---

no problems with the neighbours cause the loudness? :D

Cita:

---

Iniciado por pritt

I send you a mp to make some inquiries.

---

ok

Sorry about the name ... the translator.

The CNC Zone, do not you post the assembly of the workshop? ... it might be in another forum. It was seen that the assembly of the workshop and how to download the new CNC with a crane.

My router, then to avoid noise I have it in a "drawer."

A greeting.

so, after three weeks of waiting for the board by a user ...
the board simply does not come, and the user do not report to my mails
so I bought my own board. -.-

first putting the uninteresting cooler down :D
http://anfi-tec.de/forenbilder/10.06...sshair_4_9.jpg

for the voltage converter and north bridge, there is again a anfi-tec light cover
this is the cooler in the cad file, graphically
http://anfi-tec.de/forenbilder/10.06...sshair_4_7.jpg

simulated:
http://anfi-tec.de/forenbilder/10.06...sshair_4_8.jpg

and in real life :D
top only layed on
http://anfi-tec.de/forenbilder/10.06...sshair_4_1.jpg

distance of 22.5 mm g1/4" thread .. it also fits thick 16/10 :)
http://anfi-tec.de/forenbilder/10.06...sshair_4_3.jpg

the copper bridge already provided in the ocerclocked MSI790FX good temperatures ... then it will work at the asus too :)

Details:
http://anfi-tec.de/forenbilder/10.06...sshair_4_6.jpg

http://anfi-tec.de/forenbilder/10.06...sshair_4_5.jpg

http://anfi-tec.de/forenbilder/10.06...sshair_4_4.jpg

with the UCD (universal cooling device) SB in addition you get the board as completely cooled
should I draw a complete full cover block? (~ 12 hours of cad working)
I would at least have to mill about 10 blocks, so that the effort worthwhile for long cadding, ..

Now, you are asked:

1) a favorable light Cover + SB UCD is enough.
2) An elaborate Full Cover must be already.


regards
André

Continuing with the entrance into the workshop ... it had happened a lot.
The insulation-box has already been set up and the control PCs with monitors have been installed.
Works in comparison to the old workshop really lost in the space
http://anfi-tec.de/forenbilder/09.12.07/1.JPG

But before the CNCs were able to move back in the box, they had to be serviced in first.
http://anfi-tec.de/forenbilder/09.12.07/3.JPG

The Model-aluminum CNCs dont tolerate the coolant for miling and the copper in any way.
The CNC base are totally corroded. Thus, a AluCNC is nothing for eternity if one manufactures waterblocks.
http://anfi-tec.de/forenbilder/09.12.07/2.JPG

Then the machines into the box, and production begins ^^
http://anfi-tec.de/forenbilder/09.12.07/4.JPG

Large workshops want to accommodate large machines :D
our new helper
http://anfi-tec.de/forenbilder/09.12.07/5.JPG

handy :)
http://anfi-tec.de/forenbilder/09.12.07/6.JPG


although we have windows in the new workshop, one should not be missed,
The poster out of the first workshop... this now become indeed the third workshop ^^
hope we can stay in there for a longer time as in the other workshops -.-
http://anfi-tec.de/forenbilder/09.12.07/7.JPG

regards Andreoid

What coolant are you using?

I use white drilling and I have no cooroded.

... but, with copper, leak.

When I finish I'll try one that I bought at RDG Tools.

A greeting.

Cita:

---

Iniciado por pritt

What coolant are you using?

I use white drilling and I have no cooroded.

... but, with copper, leak.

When I finish I'll try one that I bought at RDG Tools.

A greeting.

---

we use some cheap coolant from ebay..
but this coolnt sux... i think it is not the best for health too

So i didn't post anything a long time ago... studies getting harder and harder.. spending more and more time with learning and writing tests
but now my tests of the last semester are over and i got the time to make some new blocks! :)

We got Asus crosshair IV extreme... overkclocking by iPhone... so this is the future of mainboards :D
so then,...lets cool this thing!
i made a 3D cad of the board,.. because this got to be complex
(the litle copper rings is the start of the waterblocks)
http://anfi-tec.de/forenbilder/10.10...20%2818%29.JPG

these rings will be connected tangential.. an so the blocks grows
http://anfi-tec.de/forenbilder/10.10...%20%281%29.JPG

between the PCI-E slot and the 4 capacitors i have space of ~ 8mm
if i design a waterchanel in there, it would kill every flow in the block
http://anfi-tec.de/forenbilder/10.10...20%2819%29.JPG

two lightcoverblocks or two fullcoverblocks
made the copperplates:
http://anfi-tec.de/forenbilder/10.10...%20%282%29.JPG

again the same problem... the space over the pwms is not wide enough for a chanel with a good waterflow -.-
http://anfi-tec.de/forenbilder/10.10...%20%283%29.JPG

so i took the lightcoverblock which established itself in the MSI790FX, MSI890FX,
890GXM-G65, ASUS Crosshair IV Formula, Asus M4A 890FX and in the EVGA P55 FTW 200.
http://anfi-tec.de/forenbilder/10.10...%20%287%29.JPG

i like this little tools in the cad program... radius tool :D
http://anfi-tec.de/forenbilder/10.10...%20%284%29.JPG

the SB Lightcover between the second and third graficcard with triple SLI.
the waterflow ist direct over the SB Chip.
http://anfi-tec.de/forenbilder/10.10...%20%285%29.JPG

NB PWM block, the waterflow ist direct over the NB Chip.
http://anfi-tec.de/forenbilder/10.10...%20%286%29.JPG

a view from the side. you can see the placement of the fittings between the graficcards
http://anfi-tec.de/forenbilder/10.10...%20%288%29.JPG

isometric angle
http://anfi-tec.de/forenbilder/10.10...%20%289%29.JPG

this here is interessting
the block and the board are in a cut view .. so that you can see the waterchanel, and the notch of the seal
http://anfi-tec.de/forenbilder/10.10...20%2810%29.JPG

although playing in 3D i have to test the correctness with an plexidummy
http://anfi-tec.de/forenbilder/10.10...20%2811%29.JPG

milling it in plexi
http://anfi-tec.de/forenbilder/10.10...20%2812%29.JPG

fits!
http://anfi-tec.de/forenbilder/10.10...20%2813%29.JPG

better than the plexidummy...the real ones in copper!
http://anfi-tec.de/forenbilder/10.10...20%2814%29.JPG

http://anfi-tec.de/forenbilder/10.10...20%2815%29.JPG

http://anfi-tec.de/forenbilder/10.10...20%2817%29.JPG

Finn and I are the first ones with offering the cooling set for this Asus crosshair IV extrem..
let's see how quickly the bigger manufacturers will follow us :)

-------------------------------------------------------------

today a test of our "UPC slim" was published

Our universal PWM "UPC slim" had been tested by the german watercoolingsite "Effizienzgurus.de" against a MVR-100-block by Koolance.
The UPC had got an efficiency-award! :)

next to a pair of pretty pictures and detailed descriptions of the coolers
there is still a flow test of both coolers (but unfortunately complete in german)
http://anfi-tec.de/forenbilder/10.10...%20%281%29.JPG

link to the test:
http://www.effizienzgurus.de/review/was ... daten.html

http://anfi-tec.de/forenbilder/10.10...%20%282%29.JPG

hmm somehow i cant see my pictures in here :)

Corrected images:

(=%28

) =%29

A greeting

I love this pics, really nice waterblock ^^, they are simple and efective =).

bye!

Waterblocks for the EVGA P55 CLASSIFIED 200

so,.. i have a naked EVGA P55 CLASSIFIED 200 lying here
at first the PWM modules....
The water cooler model what I design for cools over the entire length the
digital MOSFET and CPL modules (just like the original air-cooler).
The cooler will cost 45 € ...
http://anfi-tec.de/forenbilder/evga_...fied_200/1.JPG

Now for the problem case, the NB-SB cooler. Indeed, there are 4 possible options:

Option 1: Two separate cooler, a new model for the NB with series-top and UCDsb for the SB.
I thought to set all this in a package with the UCDsb for ~ 60 €
(usable fittings, max 18mm diameter).
In this version, you maybe get space problems with a thick graphiccard.

Option 2: A Lightcover model as the EVGA P55 FTW 200
with a series-PWM -top ~ 60 € (usable fittings, as desired)

Option 3: Another Lightcover but somewhat smaller than in version 2 ~ 55 €
(usable fittings, max 18mm diameter).
The cooler uses the same cover as in version 1.

Option 4: An all-through-flow cooler ..
but only one way,... a thread up and one down.
~ 65€ because no series top can be used.
In this version, you maybe get space problems with a thick graphiccard, too.

Version 1:
http://anfi-tec.de/forenbilder/evga_...fied_200/2.JPG

Version 2:
http://anfi-tec.de/forenbilder/evga_...fied_200/5.JPG

Version 3:
http://anfi-tec.de/forenbilder/evga_...fied_200/3.JPG

Version 4:
http://anfi-tec.de/forenbilder/evga_...fied_200/4.JPG

For a version with both threads up, and a channel to the SB an back there,
there is not enough space for the two required channels.

now its your turn... especially of interest is of course the opinion of the people who have a EVGA P55 CLASSIFIED 200

no opinion to the NBSB at the EVGA P55 CLASSIFIED 200?

btw... happy new year! :D

I think we are all with a big hangover hehehe.

Btw, im very impressed with your work, its amazing.

About the EVGA mobo, i think version 2 is the most suitable one. Will be amazing if version 4 is possible but you are right i think too there is no room for the 2 water channels needed.

Anyway im almost new to liquid cooling so im not of much help :)

Oh and happy new year too :D

Cita:

---

Iniciado por Ballantin

I think we are all with a big hangover hehehe.

Btw, im very impressed with your work, its amazing.

About the EVGA mobo, i think version 2 is the most suitable one. Will be amazing if version 4 is possible but you are right i think too there is no room for the 2 water channels needed.

Anyway im almost new to liquid cooling so im not of much help :)

Oh and happy new year too :D

---

thank you :D

stood today with a hangover in my workshop, but here is the finish:
Anfi-tec EVGA P55 Classified 200 set ^^
http://anfi-tec.de/forenbilder/evga_...fied_200/6.JPG
is in my shop, and will be available at aquatuning.uk/us for 89,90€ (120$)

tomorrow i'll make some more pictures

The new PWM037 .. cools as the original cooler, the digital PWMs and the CPL components.
http://anfi-tec.de/forenbilder/EVGA-...FIED-200/1.JPG

and this is the finished EVGA P55 CLASSIFIED 200 watercoolingset:
http://anfi-tec.de/forenbilder/EVGA-...FIED-200/5.JPG

just like the EVGA P55 FTW 200 had , i had created an opening for the silver quarz in this lightcover.
The distances, except for the connection to the SB, are completely identical to the EVGA P55 FTW 200 Light Cover.
As a cover I have now decided for a series-cover with the size of the UCDgrande.
http://anfi-tec.de/forenbilder/EVGA-...FIED-200/4.JPG

On the SB there is no engraving ...
in turn, saving significant cost in production because no tool change must take place.
Instead, there is a nice design-gimmick with a few indicated Fins :D.
This is really just a design element! The SB can be cooled completely
through the copper-bridge to the NB without additional air flow.
The copper-bridge- (Light Cover) technology has proven good temperatures on
many boards, even in overclocked state (eg. MSI 790FX, ASUS Crosshair Formula IV ..etc).
There is no need for critics to redirected at a water channel.
Simply not liking the bare copper, one can say ^^
(Because I know that the question is asked often:
Unfortunately, we still do not have good/reliable partner for nickel plating in the area)
http://anfi-tec.de/forenbilder/EVGA-...FIED-200/8.JPG

I was against to make a complete new cover, because we can not produce
these low-priced in the same good quality as our series-cover.
I have chosen a series-cover, because we always have them in stock in the highest quality.
This makes the cooler is not only cheaper, furthermore the surfaces and accuracy
the cover remain in the desired quality.

The mainboard is to be quite good for a full cover solution, but to produce
high quality fullcover economically, we miss the instruments for.
This was a compromise that I did not wish to.
Then rather,usual well, but much cheaper.
http://anfi-tec.de/forenbilder/EVGA-...FIED-200/7.JPG

Not to forget is that the copper part disappears among graphics cards.
The grandecover offers the PCI-E slot a little more space than its predecessor
with the longer PWMtop at the EVGA P55 FTW 200th
The grandecover affords instead of the proposed version of the Nano cover,
a compatible for fittings with a diameter of 22.5 mm.
http://anfi-tec.de/forenbilder/EVGA-...FIED-200/9.JPG

The EVGA Set is now available in the anfi-tec shop for only 89.90€ (120$)..
In stock next week then at Aqua tuning.
http://anfi-tec.de/forenbilder/EVGA-...IED-200/10.JPG

http://anfi-tec.de/forenbilder/EVGA-...FIED-200/2.JPG

really nice waterblock =).

bye!

Hi everybody,...
i am so sorry that i have been away for so long.
At the moment i'm writing my bachelor-thesis in engineering in an automotive supply company.
this eats so much time :(
So i've not made anything new for computers since a long time.
----------------------------------------------------------------------

at july 15th i have finished waterblocks for the Asus Crosshair V Formula.
a user of the "PC Games harware" forum has sent it to me for taking the measurements :)

Due to my tight schedule due to the studies I have
I again opted for an inexpensive light cover version.
Compared to four individual coolers, i think that this is probably the better solution.
http://anfi-tec.de/forenbilder/11.07...blocks%201.jpg

a copper bridge will work again very well at this voltage converters.
This bridge is already proved successful at several coolers. It is very similar
to the Asus Crosshair IV extreme lightcover from 2010.
http://anfi-tec.de/forenbilder/11.07...blocks%202.jpg


Unlike to the 2010s light cover is, that the original backplates can be use in continue. So the pressure is exactly the same as given by the original air cooler.
http://anfi-tec.de/forenbilder/11.07...blocks%203.jpg
http://anfi-tec.de/forenbilder/11.07...blocks%204.jpg

SB cooler has cut-outs for components below the top in the copper .
The recesses were milled in on both sides, so you can chose the position of the connecting thread by rotating the cooler (top and bottom selectable).
http://anfi-tec.de/forenbilder/11.07...blocks%206.jpg

SB block
http://anfi-tec.de/forenbilder/11.07...blocks%207.jpg

PWM NB combi block (lightcover)
http://anfi-tec.de/forenbilder/11.07...blocks%208.jpg

in the lightcover you can screw fittings with a diameter of 22,5mm.
in the little SB block only fittings with a diameter of 18mm
http://anfi-tec.de/forenbilder/11.07...blocks%205.jpg

... the cnc has got some huge updates too.. i hope that i have more time soon to translate some more posts :(

After a long time here again an update from us! btw.. happy new year :D

I have now successfully completed my Bachelor of Engineering
and now working as a design(construction) engineer in a mechanical engineering company.
Finn is just in the middle of his full-time study of electrical engineering.

But do not worry, although we had such important milestones in 2010, we were not lazy this summer in Anfi-tec!
Have diligently built in our workshop and the CNC milling machine further.
Unfortunately, the documentation is a little left by the wayside but we try to fill these at later times .

Now for the reason of the posting:
we made 5 new waterblocks!

GIGA-SET07 Gigabyte GA-X58A-OC
* PWM 043 Gigabyte GA-X58A-OC
* NBSB 026 Gigabyte GA-X58A-OC
* UCD sb

MSI-SET05 MSI 990FX-GD65
* PWM044
* UCD grande

Anfi-tec ASUS Rampage IV Formula Set
*PWM 046 für das ASUS Rampage IV Formula
* UCD sb

Asus M5A97 Pro
* PWM047
-----------------------------------------------------------

so whats in here?
http://anfi-tec.de/forenbilder/11.11...%20X58%201.jpg

wow,.. a mother board... Who would have thought that :D
a Gigabyte GA-X58A-OC, Intel X58
http://anfi-tec.de/forenbilder/11.11...%20X58%202.jpg

unpacking
http://anfi-tec.de/forenbilder/11.11...%20X58%203.jpg

designing the blocks as always, the first is the DUMMY from plastic. today in blue plexiglass.
http://anfi-tec.de/forenbilder/11.11...%20X58%204.jpg

PWM block:
http://anfi-tec.de/forenbilder/11.11...%20X58%205.jpg

http://anfi-tec.de/forenbilder/11.11...%20X58%206.jpg

With a copper-bridge and cutouts for disturbing components from the bottom end.
http://anfi-tec.de/forenbilder/11.11...%20X58%207.jpg


The PWM cooler was by far the trickiest PWM cooler we have developed!


now fully equipped motherboard Gigabyte GA-X58A-OC
with blocks in copper:

Finn has so unfortunately overlooked two to be cooled components in the prototype for the PWMs :
http://anfi-tec.de/forenbilder/11.11...%20X58%208.jpg

Therefore once a redesigns of the PWM cooler, in which the PWM043 grew a bit.
http://anfi-tec.de/forenbilder/11.12...-X58A-OC_4.JPG

Never before have we had a cooler that had to be milled out with so many levels.
That's almost been like a graphics card cooler:
http://anfi-tec.de/forenbilder/11.12...-X58A-OC_2.JPG

http://anfi-tec.de/forenbilder/11.12...-X58A-OC_1.JPG
NBSB026
http://anfi-tec.de/forenbilder/11.12...-X58A-OC_5.JPG

Complete view of the GIGA-SET07 Gigabyte GA-EX58-OC consisting NBSB026 / UCD SB / PWM043
http://anfi-tec.de/forenbilder/11.12...-X58A-OC_6.JPG

http://anfi-tec.de/forenbilder/11.12...-X58A-OC_3.JPG

-----------------------------------------------------------
MSI 990FXA-GD65

http://anfi-tec.de/forenbilder/11.12...FXA-GD65_1.JPG

The longest and thinnest PWM cooler from us (PWM044)
http://anfi-tec.de/forenbilder/11.12...FXA-GD65_2.JPG

the familiar UCDgrande
http://anfi-tec.de/forenbilder/11.12...FXA-GD65_3.JPG

By this setting here G1/4" connectors can be used as usual.
http://anfi-tec.de/forenbilder/11.12...FXA-GD65_4.JPG

MSI-SET05 MSI 990FX-GD65
http://anfi-tec.de/forenbilder/11.12...FXA-GD65_5.JPG


---------------------------------------------------------------------------------------------
and some more PWM blocks:

one for the Asus Rampage IV Formula
http://anfi-tec.de/forenbilder/11.12...ormula%205.JPG

the new PWM 046 for the ASUS Rampage IV Formula
uses the original screws and the original motherboard backplate of the Board.
http://anfi-tec.de/forenbilder/11.12...ormula%202.JPG

As mainboardset with the UCDsb (here only upped the ante without lashes)
http://anfi-tec.de/forenbilder/11.12...ormula%203.JPG

how little the water coolers does look on the board when the aircoolers are removed. The airblocks are just show for 70%
see: http://www.google.de/search?hl=de&cp...D5GA8gPQgYH7CQ
http://anfi-tec.de/forenbilder/11.12...ormula%204.JPG

--------------------------------------------------------------------------------------------

now I have one question to you, does the PWM cooler....
http://anfi-tec.de/forenbilder/11.12...ormula%201.JPG

....fit on the Asus Rampage Extreme IV, too? cause they look damn similar. The PWM block has a hole spacing of ~ 100mm. If one compares the air cooler then it looks like the PWM cooler can be compatible.
http://anfi-tec.de/forenbilder/11.12...%20extreme.jpg
source: bit-tech.net
Rampage Formula IV was at the left PWMs nothing to cool underneath the airblock. but how does it look at extreme?
Also, the SB I'd like to see naked at the "extreme" ... possibly one of you has the board?

----------------------------------------------
for the Asus M5A97 Pro....
http://anfi-tec.de/forenbilder/11.12...%20Pro%202.JPG

new PWM model
PWM047 Asus M5A97 Pro
http://anfi-tec.de/forenbilder/11.12...%20Pro%201.JPG

Awesome pics! I have the 990FXA GD65 and that looks so cool! (but I thinking I should sell it and go Intel :D, we'll see.)

Gratsz anyway!

Cita:

---

Iniciado por Qwerty123

Awesome pics! I have the 990FXA GD65 and that looks so cool! (but I thinking I should sell it and go Intel :D, we'll see.)

Gratsz anyway!

---

did you sold your board? :D

Anfi-tec PWM 044 MSI 990FXA-GD65
http://shop.anfi-tec.de/images/produ...ages/201_0.JPG

http://shop.anfi-tec.de/images/produ...ages/201_1.JPG

http://shop.anfi-tec.de/images/produ...ages/201_2.JPG

does fit on the 990FXA-GD80 too :)

long time ago but here a new update from us.
we build up a photo-corner what gives our productphotos an ultra improvement
here for example the NBSB028
http://anfi-tec.de/forenbilder/2015....03/NBSB028.jpg

and here an old picture for example
http://anfi-tec.de/forenbilder/2015....20AF03/alt.jpg

----------------------------------------

btw,.. good things take a lot of time,
http://anfi-tec.de/forenbilder/2015.11.29%20AF03/02.jpg

So what is this going to be? :)
http://anfi-tec.de/forenbilder/2015.11.29%20AF03/03.jpg

the pre-series-production started well
http://anfi-tec.de/forenbilder/2015.11.29%20AF03/04.jpg



we did sooo many tests to provide the best performance due to our teststation
(looks old and dirty but there is a lot of knowledge for waterblock-testing hidden in the inside)
http://anfi-tec.de/forenbilder/2015.11.29%20AF03/01.jpg



in the end a little question: from which material is the mounting of your dream CPU-waterblock?
- copper
- brass
- stainless steel
- sth. else?

nobody wants to say sth?

here something neeeew
with alot effort we worked at our new homepage
http://www.bilder-upload.eu/upload/8...1449438855.png
Anfi-tec.de ...it is not yet 100% ready,... an intelligent compatibility-list will follow.
A page about us, a little page about reference-projects, and a page for partner ist also planed. (maybe the Forum want to have a banner placed there too?)

Annnnd this is not the end:
Here the delicious piece, fresh from the teststation with an absolute top performance in cooling efficiency and flow!!!
http://www.bilder-upload.eu/upload/0...1449438890.jpg
With over 130 hours of development-time in design and internal channel geometry [B]the new Anfi-tec "three" CPU waterblock[/ B] is a worthy successor to our Soleil02 CPU cooler.
Soon the probably most configurable CPU waterblock in the world of watercoolers!
This thing soon is going to shake up the rankings :D
The top is available in black and white POM, (metal is not planned, and acylic glass we never do because of the risk of fracture anyway)
The mounting will be available in VA, brass and copper
The cover is btw acylic glass in smoke gray and can be changed in red, green, blue etc ... adjusted according to the board!
That will just look good always :)

For those who want to have the Anfi-tec "drei" CPU waterblock, we also have an AMD version!
http://pic.anfi-tec.de/2015.12.13%20...l/AF03_amd.jpg
(real pictures will follow next week)


The covers on the top we want to offer in various colors, so that it does match perfectly to your motherboard.
Here is a "small" selection:
http://pic.anfi-tec.de/2015.12.13%20...ahl/bundel.jpg

We tried to consider all wishes:smoke gray (standard), red (goes well with Asus), orange (goes well with Gigabyte), greenlight blue (goes well with Intel and Asus), dark blue, neon red, neon blueneon orange / yellow, neon green, copper, brass
http://pic.anfi-tec.de/2015.12.29_CP...03_cover_2.JPG

with UV light that is really difficult to photograph. In reality the colors are much nicer :(
http://pic.anfi-tec.de/2015.12.29_CP...03_cover_1.JPG

fresh out of the machine, a little dirty from cutting excipient
http://pic.anfi-tec.de/2015.12.29_CP...03_cover_3.JPG

the stainless steel brackets, we have now there also :)Additionally, with copper and brass Cover
http://pic.anfi-tec.de/2015.12.29_CP...03_cover_4.JPG

You also can choose the mounting-brackets completely
http://pic.anfi-tec.de/2015.12.29_CP...03_cover_5.JPG

What do you say? Did we forget something? :D

-------------------------
somehow i have a problem with my account :(
cannot login anymore :'(

regards
Andreoid

now a little journey through time:

Anfi-tec CPU01 "exFRS"
http://pic.anfi-tec.de/2016.01.02_CP...ec_exfrs_1.JPG

Anfi-tec CPU01 "exFRS"
http://pic.anfi-tec.de/2016.01.02_CP...ec_exfrs_2.JPG

Anfi-tec CPU02 "Soleil01"
http://pic.anfi-tec.de/2016.01.02_CP...c_soleil01.jpg

Anfi-tec CPU02 "Soleil02" (performance improvement)
http://pic.anfi-tec.de/2016.01.02_CP...c_soleil02.jpg

Anfi-tec CPU03 "drei"
http://pic.anfi-tec.de/2015.12.06_CP...PU03_INTEL.jpg

In terms of time the whole thing looks like this:
30/03/2008 CPU01 "exFRS" was limited to 50 pieces (sold out)

21/12/2008 CPU02 "Soleil01" (sold out)

01.2012 CPU02 "Soleil02" (still about 25 left in stock)

12.2015 CPU03 "three" (series launch of 100 units)

The "drei" is basically an evolution of the Soleil02.
In the inside it has a similar structure. Again, with the multi-intake-outtake principle only much finer, larger, with a calculated structure and only "three" inlets ;)
For the exterior design I wanted something elaborate like the exFRS. Therefore we needed a cover.
Since you want to but have the inlet left or right , the Cover is 180° rotatable and so the lettering is always horizontal.
Because of through the larger structure the cooler went more and more in the width, we had a design forth what the rectangular shape looks outstanding with Cover.
Core inspiration here were the broken triangles of Oblivion ... God I like these:
http://pic.anfi-tec.de/2016.01.02_CP...g/oblivion.jpg
Because we wanted to present a manufacturable CPU cooler model together with the new website to Christmas, we have refrained from its own mounting bolts and put on proven. Here we have retaining bolt with suspension purchased directly from Watercool which therefore also specify the assembly / lateral insertion height of the bracket. One or the other perhaps has noticed it indeed by himself that we have bought here something ;)
http://pic.anfi-tec.de/2016.01.02_CP...nformation.jpg
http://pic.anfi-tec.de/2016.01.02_CP.../Lieferung.jpg

##############################

Who likes can also follow us on facebook https://www.facebook.com/Anfitec

##############################


somehow i have a problem with my account
cannot login anymore :'(

regards
Andreoid

today we finished the series of the "drei" CPU03 waterbock.
The copper-bottom has an incredibly fine structure, with convex base for a perfect sit on the CPU!

http://pic.anfi-tec.de/2016.01.31_CP...CPU03boden.JPG
next wek we gonna send the first samples to some review-websites

##############################

Who likes can also follow us on facebook https://www.facebook.com/Anfitec

##############################

somehow i have a problem with my account
cannot login anymore :'(

regards
Andreoid

besides all the water coolers something new from the workshop. We have tinkered us a sorting receptacle. With little effort you have such a tool at hand and place without a lot of searching exactly what you need:
http://pic.anfi-tec.de/2016.02.13_WS_und_drei/WS1.JPG

from the front to the back:
V countersink, countersink, passage Taps, blind hole taps, and various
http://pic.anfi-tec.de/2016.02.13_WS_und_drei/WS2.JPG

.


.

-------------------------------------------------------------------------------

.

also something new of out new CPU Waterblock "drei" !
Early testers got their models and already unpacked.
Here the Youtuber Kensch:

http://pic.anfi-tec.de/2016.02.13_WS_und_drei/drei.JPG
https://www.youtube.com/watch?v=W4liL4aAptE

This time we have given the same effort like with the cooler also to the packaging.
After the unpacking the can makes then even well as beeen desk pencil holder ...
With the foam inlays the pen nibs also does not get broken.
Can you because even superior if you open the box up or down.
Or what do you think? Shall we stick the label directly this way, that the embossed cans side down, and the "openingside" is up?

##############################

Who likes, can like us on Facebook: [URL] https://www.facebook.com/Anfitec [/ URL]

##############################.
somehow i have a problem with my account
cannot login anymore :'(

regards
Andreoid