Ayuda para afinar OC a un i7 920
Ahora que ha empezado el fresquete, me ha dado por hacer OC para no pasar frío :lol:
Actualmente lo tengo así, y por primera vez he conseguido hacer las 20 pasadas del LinX. El problema es que las temps suben a 85 grados en 1 o 2 cores y los otros 2 a 75 o así.
Código:
> Advanced Frequency Settings [Press Enter]
CPU Clock Ratio [20 X]
CPU Frequency 4.00GHz (200x20)
> Advanced CPU Core Features [Press Enter]
Intel(R) Turbo Boost Tech. [Disabled]
CPU Cores Enabled [All]
CPU Multi-Threading [Enabled]
CPU Enhanced Halt (C1E) [Disabled]
C3/C6/C7 State Support [Disabled]
CPU Thermal Monitor [Disabled]
CPU EIST Function [Auto]
Bi-Directional PROCHOT [Auto]
QPI Clock Ratio [x36]
QPI Link Speed 7.2GHz
Uncore Clock Ratio [x16]
Uncore Frequency 3200MHz
>>>>> Standard Clock Control
Base Clock(BCLK) Control [Enabled]
BCLK Frequency(Mhz) [200]
Extreme Memory Profile(X.M.P.) [Disabled]
System Memory Multiplier (SPD) [ 8.0]
Memory Frequency(Mhz) 1066 1600
PCI Express Frequency(Mhz) [100]
>>>>> Advanced Clock Control
CPU Clock Drive [700mV]
PCI Express Clock Drive [700mV]
CPU Clock Skew [ 0ps]
IOH Clock Skew [ 0ps]
> Advanced Memory Settings
Extreme Memory Profile(X.M.P.) [Disabled]
System Memory Multiplier (SPD) [ 8.0]
Memory Frequency(Mhz) 1066 1600
Performance Enhance [Standard]
DRAM Timing Selectable (SPD) [Auto]
Profile DDR Voltage 1.5V
Profile QPI Voltage 1.175V
x Channel Interleaving 6 Auto
x Rank Interleaving 4 Auto
>>>>> Channel A
> Channel A Timing Settings [Press Enter]
> Channel A Turnaround Settings [Press Enter]
>>>>> Channel B
> Channel B Timing Settings [Press Enter]
> Channel B Turnaround Settings [Press Enter]
>>>>> Channel C
> Channel C Timing Settings [Press Enter]
> Channel C Turnaround Settings [Press Enter]
> Advanced Memory Settings
Voltage Types Normal Current
-------------------------------------------
>>>CPU
Load-Line Calibration [Level 2]
CPU Vcore 1.22500V [1.30000]
x Dynamic Vcore(DVID) +0.00000V Auto
QPI/Vtt Voltage 1.175V [1.315V]
CPU PLL 1.800V [1.800V]
>>> MCH/ICH
PCIE 1.500V [Auto]
QPI PLL 1.100V [Auto]
IOH Core 1.100V [Auto]
ICH I/O 1.500V [Auto]
ICH Core 1.100V [Auto]
>>>DRAM
DRAM Voltage 1.500 [1.640V]
DRAM Termination 0.750 [Auto]
Ch-A Data VRef. 0.750 [Auto]
Ch-B Data VRef. 0.750 [Auto]
Ch-C Data VRef. 0.750 [Auto]
Ch-A Adrdress VRef. 0.750 [Auto]
Ch-B Adrdress VRef. 0.750 [Auto]
Ch-C Adrdress VRef. 0.750 [Auto]
> Miscellaneous Sttings [Press Enter]
Isochronous Support [Enabled]
Virtualization Technology [Enabled]
Así que me gustaría saber si:
- Tengo algún voltaje muy alto o debería cambiar algo
- Si al desactivar el HT notaré mucho el bajón o no de rendimiento, porque según he leído me bajarían unos 10º las temps.
- Qué opciones de ahorro de energía debería activar para que siga estable esto?
- Debería poner las latencias en manual?
Saludos y gracias.
Mi equipo:
Código:
Intel Core i7 920
Gigabyte GA-x58-UD7
Mushkin Redline 6GB 1600MHz
Noctua NH-D14
ATi HD5870
Corsair HX850
Coolermaster HAF 932
