[AF] Andreoid & Finnzwerg retoques watercool (muchas fot

Hi everybody!
I would like to show you some pictures what I (André) with a friend (Finn) do tinker in our free time.
We both come from Germany like Bundymania.

Our crafting threads on hobby basis consist in many forums since 2007.
The self made waterblocks have exited many readers, and some of you allready know our homemade coolers. Maybe some of you allready had discovered our pictures in the waterblock-picture-threads in other forums.
In close cooperation with many forum users, we have developed a lot of waterblocks.
Often, you can take part of the developement and be really close with decisions here in the forum.

I hope that you are going to enjoy reading my posts and you do some questions or answering mine, when i have some questions in design or something like this! ^^

Here is a picture of what we are able to do and so you can see what you can expect here in this thread ;)
http://anfi-tec.de/forenbilder/09.11.09/9.jpg

at the beginning a picture from our old workshop in my basement:
http://anfi-tec.de/forenbilder/09.11.09/1.JPG
Left side: a noise-protection-box with CNCs, on the right...our manual drill.
at the bottom: this is me...gluing the CNC coolant effluent
http://anfi-tec.de/forenbilder/09.11.09/2.JPG
the workshop was really small.
It was 9m² and is now too small for our new CNC
But see below for more

http://anfi-tec.de/forenbilder/09.11.09/8.jpg
left side, our first CNC - right, a couple of EVGA 680i PWM copper bottoms

http://anfi-tec.de/forenbilder/09.11.09/5.5.png
here a CAD of our new CNC milling machine ...
here in the thread you can follow the assembling ;)
from the CAD to the implementation of the real machine

the old basement was much, much too small for our new CNC machine...so we watched out for a new room.
An acquaintance have had a little space for ous in his wooden hall.
The place was just twice as large as my cellar, but hopefully that will be enough space for our new workshop.
http://anfi-tec.de/forenbilder/09.11.09/3.JPG

in the next few posts I will provide you with pictures of building the new workshop,.. so stay tuned ;)


MfG Andreoid & finnzwerg
(please anwser in english.. spanish i only can translate with google -.- )

The first picture is awsome! The finish of the blocks is quite impresive for "homemade" blocks. I have read you in Xtreme Systems before and it's a plesure to have you in our forums.

BTW, please edit the pictures because they exceed the maximum allowed size (650*650) or just leave them like links or thumbnails.

Regards and hoping for more photos! :wink:

Cita:

---

Iniciado por Rafa91

The first picture is awsome! The finish of the blocks is quite impresive for "homemade" blocks. I have read you in Xtreme Systems before and it's a plesure to have you in our forums.

BTW, please edit the pictures because they exceed the maximum allowed size (650*650) or just leave them like links or thumbnails.

Regards and hoping for more photos! :wink:

---

thank you very much :)

wtf 650x650? and i though 600x800 is smal :D
hmm can't make them more smal... cause it would have an affect on other forums also -.-
and if i just link these pix everybody is nerved cause he have to open every single link :(

Hello Andreoid

As Rafa said, truly impresive work on those blocks.

I might contact you in a while for a custom work on a Maximus III Extreme :)

The max width for the pictures is 650 pixels so, please, re-upload them using an image host like this. Select the URL file type.

Greetings

Cita:

---

Iniciado por Andreoid

wtf 650x650? and i though 600x800 is smal :D

---

Yes, I also think that it's small, but are the rules and we have to respect them. If you don't do it a mod will do it xD

Cita:

---

Iniciado por Rafa91

Cita:

---

Iniciado por Andreoid

wtf 650x650? and i though 600x800 is smal :D

---

Yes, I also think that it's small, but are the rules and we have to respect them. If you don't do it a mod will do it xD

---

haha... i think these are smal enough now :D

so,..no new cnc ,..without a place for it ^^
the room for the new workshop at the beginning looked like this:
http://anfi-tec.de/forenbilder/ausbau1/1.JPG

Storage -.- good that vacuum cleaner exists ^^
http://anfi-tec.de/forenbilder/ausbau1/2.JPG

The wall you can see here is the wall to the outside.
We have embedded a couple of thick fiberglass mats so it's not going to be so cold in winter.
http://anfi-tec.de/forenbilder/ausbau1/3.JPG

it is finally a more lighted workshop ... This is much better than a cellar:)
http://anfi-tec.de/forenbilder/ausbau1/5.JPG

then we started with the casing:
http://anfi-tec.de/forenbilder/ausbau1/6.JPG

here the first wall is finished:
http://anfi-tec.de/forenbilder/ausbau1/7.JPG

That was't this easy with the 2 oblique beams
http://anfi-tec.de/forenbilder/ausbau1/8.JPG

and here the second wall
http://anfi-tec.de/forenbilder/ausbau1/10.JPG

-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------


so, that I not only bother you with dirty pictures of building the workshop
here something brilliant:

Finn and I had bought two 16GB USB Flash Drives supertallent
these were ideal to refine ^^
http://anfi-tec.de/forenbilder/09.11.02/usbstick/1.jpg

very slowly and carefully engraved with the CNC
http://anfi-tec.de/forenbilder/09.11.02/usbstick/2.jpg

like it?
http://anfi-tec.de/forenbilder/09.11.02/usbstick/3.jpg


http://anfi-tec.de/forenbilder/09.11.02/usbstick/4.jpg


regards Andreoid

Cita:

---

Iniciado por Andreoid

http://anfi-tec.de/forenbilder/09.11.02/usbstick/3.jpg

---

I'm drooling xD

Cita:

---

Iniciado por Rafa91

I'm drooling xD

---

^^

building the workshop goes on

Finn was afraid that he will get cold feet in winter :D
so he had insulated the floor additionally
http://anfi-tec.de/forenbilder/ausbau2/1.JPG

well protected during working with the circular saw
http://anfi-tec.de/forenbilder/ausbau2/2.JPG

and the saw does its work
http://anfi-tec.de/forenbilder/ausbau2/3.JPG

Today, another cameraman
(I was sitting at home with a fresh operated hernia at this time -.-)
http://anfi-tec.de/forenbilder/ausbau2/4.JPG

The new floor has been moved up into the last corner:
http://anfi-tec.de/forenbilder/ausbau2/6.JPG

ready:
http://anfi-tec.de/forenbilder/ausbau2/8.JPG
whether it works... i dont know
cause we have never worked without the wooden floor :D

-------------------------------------------

here 2 full surround views:
http://anfi-tec.de/forenbilder/ausbau2/9.JPG
http://anfi-tec.de/forenbilder/ausbau2/gr9.JPG

for a large view, click on the link under the pictures.

http://anfi-tec.de/forenbilder/ausbau2/10.JPG
http://anfi-tec.de/forenbilder/ausbau2/gr10.JPG

-------------------------------------------

Then they went on with the inside working
First made a couple of drawers
which lend themselves well as a surface to do the cuts :)
http://anfi-tec.de/forenbilder/ausbau2/12.JPG

and the first factory-bank (with sitting-height) was finished
It was getting dark outside ... and the 2 workers were exhausted


-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------

and now something for everyone who doesnt look in here for building workshop pictures:

my sister bought her aan dell-laptop... she said that it is too impersonal
so I've levered out the logo and made 2 plaques to engrave preturned

first try...
http://anfi-tec.de/forenbilder/ausbau2/DSC06363.JPG

here the cnc made some mistakes with the "n"
http://anfi-tec.de/forenbilder/ausbau2/DSC06364.JPG

not difficult to guess what's her name ^^
http://anfi-tec.de/forenbilder/ausbau2/DSC06367.JPG

i hope that i can show you something diffentent than engraving works next time :(

regards Andreoid

actually this should be a watercooling thread :D so I have to show you some waterblocks a few times between ^^

top left of the MSI 790FX fullcover ... and the follower down in the middle
http://anfi-tec.de/forenbilder/10.05.17/1.JPG

because a bad sitting capacitor on the board the new MSI 890FX fullcover block have now a smaller top. is has a winding distance of 18mm
http://anfi-tec.de/forenbilder/10.05.17/3.JPG

Despite 890s engraving backward compatible to 790FX ;)
http://anfi-tec.de/forenbilder/10.05.17/2.JPG

----------------------------------------------------------------

and if we are talking about the 890 boards...
PWM032 the new 890FX for ASUS boards!
http://anfi-tec.de/forenbilder/10.05.17/4.JPG

----------------------------------------------------------------

here a few photos of the user "fhantastic" from the "forumdeluxx"
He has let nickeled his evga cooler set (not by us...we can't do this)

http://anfi-tec.de/forenbilder/10.05.17/5.JPG
klick

PWM029 EVGA P55 left block
http://anfi-tec.de/forenbilder/10.05.17/7.JPG
klick

the EVGA P55 FTW 200 fullcover Waterblock
but it dont fit on the EVGA P55 FTW without "200" addition
http://anfi-tec.de/forenbilder/10.05.17/8.JPG
klick

http://anfi-tec.de/forenbilder/10.05.17/9.JPG
klick

regards
André

something new again ;D

I start with a couple of photos that are prettier than mine :D
a high quality project, which I supported a little bit:

http://anfi-tec.de/forenbilder/marc/...kuehler(6).jpg
Marc's "Projekt Black meets Blue" - Marc1993
http://www.hardwareluxx.de/community/f1 ... 84330.html

on the Gigabyte GA-P55A were installed a PWM031 two times and a UCD grande.
the bottoms were stained dark chemical

http://anfi-tec.de/forenbilder/marc/...serkuehler.jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(1).jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(2).jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(3).jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(4).jpg

http://anfi-tec.de/forenbilder/marc/...kuehler(5).jpg

hmmm ,..,... In my presentation, the last five images are not shown